1-888-743-0095
|
barcode scanners, barcode printers, barcode verifiers, barcode software - and more! |
1-888-743-0095 |
| Home Site Map Buy On-Line Or Call Toll Free 1-888-743-0095 Request A Written Quote Search |
The SV SERIES ON-LINE VERIFIERS
The SV Series of scanner/verifiers by RJS provides both fixed position
scanning and high-speed on-line ANSI method verification of linear bar
codes. This unique instrument can be used for many types of bar code
scanning and/or verifying applications.
The SV Series assures that bar code print quality is at an acceptable level. It checks to make sure the print mechanism has not failed or gone out of adjustment during operation. It even makes sure that the correct data is encoded and that the encoded data is in the proper format.
The SV Series analyzes and reports virtually every verification parameter known. ANSI and Traditional print quality parameters are transmitted along with decoded data. The reported symbol quality parameters ensure the print method or complete bar code process is optimized. This is important for ISO corrective action procedures, label manufacturing and printing, tracking systems, ink jet applications and more.
The SV SERIES of SCANNER/VERIFIERS are FIXED POSITION SCANNERS
The SV Series can operate as a fixed position scanner. But, since it also provides diagnostic bar code quality information, it can reduce system downtime and save material costs. It does this by isolating the source of the problem. Once the source of the problem is found, it can be corrected before non-readable bar codes are printed and material is wasted.
The diagnostic capability is also useful when installing the scanner or after a conveyor or printer maintenance cycle. The available print quality information gives an indication of first time read rates, optimal scanner alignment, optimal conveyor speed and optimal printer settings and adjustments. In short, everything that is needed to ensure proper set-up of a system.
EASY SETUP / FLEXIBLE INTERFACE
 |
The SV Series uses a serial
port to interface with RJS ScanVision, a PC based software package used
for set-up and monitoring. Use ScanVision for SV setup while the
scanner/verifier is off line and/or use it for real-time bar code quality
analysis while the scanner/verifier is operating. The unit also
incorporates Model SV download language for setup without RJS ScanVision.
Five hardware outputs are available via an I/O-Power port for logic operation such as No Read, Poor Quality, Good Quality or Good Read status. Two synchronization inputs are also available for robust No Read evaluations. Two LED’s are available for status indications. The serial port can also be used without ScanVision to provide decoded data and/or bar code analysis information to a host system.
|
RJS MODEL SV SERIES SYSTEM DESCRIPTION and TECHNICAL DATA
SV Series Model Specifications*
| SV100 | SV100HD | SV100C | SV200-1 | SV200-2 | |
| Analyses/sec | 100 | 100 | 100 | 200 | 200 |
| Beam Width | 6" (152mm) | 4.5" (114mm) | 10.5" (267mm) | 2.5" (63.5mm) | 1.75" (44mm) |
| Focus Distance | 8" (203 mm) | 6" (152mm) | 15" (381mm) | 8" (203mm) | 6" (152mm) |
| X dim (min) | .0067" (.17mm) | .005" (.127mm) | .013" (.33mm) | .0067" (.17mm) | .005" (.127mm) |
* Contact POS-Warehouse Technical Support for information on custom and other models
Accessories and Options
Universal Power Supply Unit, RJS ScanVision Software, Female DB-9 to Female DB-9 Communication Cable (6 ft. (1.8 M) length), Calibration Symbol, Mounting Stand, Rastering Scan Line, Interface Kits for Zebra and Sato Printers (contact POS-Warehouse for additional printer types), Power Supply/Sensor/Output Cable.
Data and Quality Parameters Available**
Decoded Data, All Symbol Characters, Modulo Check Digit Analysis, Symbology Type, ANSI Method Overall Symbol Grade, ANSI Method Parameter Grades, (Reference Decode, Decodability, Modulation, Symbol Contrast, Rmin/Rmax, Defects, Min. Edge Contrast and Global Threshold), Average Bar Deviation, Ratio (if applicable), PCS, Element Reflectance (min. and max.), Quiet Zone Analysis, X Dimension, Inter-Character Gap (if applicable), No Read Flag, % decode, Partial Read Analysis, Pass/Fail Flag, Data Match (up to ten (10) fields), Increment/Decrement (base 10 and base 36).
** Note:
1. All reflectance parameters require calibration, fixed scanning distance and fixed angle of scan
2. X dimension requires fixed scanning distance
Symbologies
USS Code 39, USS Code 128, USS Code 93, USS Codabar,
USS Interleaved 2 of 5, UPC / EAN including 2 and 5 digit supplemental codes
(Contact POS-Warehouse for special symbology applications.)
Scanning Performance
Depth of Field – Mount at specified focus distance for most accurate verification operation.
Ladder or Picket Fence Bar Codes
Up to four (4) bar codes across
Operation Modes
Sync (edge and envelope), Freescan and ScanVision off line modes can be enabled
Physical
Package: 4.4" (112 mm) x 2.4" (61 mm) x 5.2" (132 mm)
Indications: Five (5) LED’s – Power/Sync, Calibration, Read, two (2) programmable LED’s
Comm Port: DB-9 male, RS 232C, programmable baud rate up to 115200 baud
I/O-Power: DB-15 male, five (5) programmable outputs, two (2) sync inputs
+5VDC @ 1 amp required
Mounting: Two (2) sets of mounting holes on two (2) different surfaces or a clamp for tightening to a 3/8" (9.5 mm) rod.
| Buy It! Canadian customers will be billed in Canadian funds. U.S. and International customers will be billed in U.S. funds. Shopping cart and on-site calculations shown in U.S. funds only. Click Add to add to Shopping Cart. Click Checkout Counter to view Shopping Cart or to complete your purchase. |
 |
 |
|
 |
 | ||||||
| RJS | 002-7973 | SV100 Series Method Verifier (Medium Density, 6" Beam Width and 8" Focus Distance), 002-7973 | $2,846.45 | $1,897.63 | $1,725.12 |
| |||
| Related Items Accessories, Options, Add-Ons and Additional Component Parts Related To The Primary Product On This Page. Some Component Parts May Be Required For Operation Of The Primary Product. |
|||||||||
|
|
|
| ||||||
| RJS | 002-7639 | Communications Cable For SV100, Null Modem, 002-7639 | $61.88 | $42.97 | $39.06 |
| |||
| RJS | 002-7972 | Sky Hook Mounting Stand Assembly For SV100/200 - Special Order, 002-7972 | $371.25 | $257.81 | $234.38 |
| |||
| RJS | 002-8048 | ZEBRA2 XiII/XiIII/III PLUS INTERFACE KIT, Interface PCB, universal PSU, printer EPROMs, verifier cable, 002-8048 | $697.65 | $484.48 | $440.44 |
| |||
Customer Service Guarantee
By now you will have no doubt recognized that the prices at
POS-Warehouse.com are the
lowest prices that you’ll find anywhere for an extensive range of products including barcode scanners, barcode printers, receipt printers and cash drawers from the world’s
finest barcode product manufacturers. You may also have taken note of our many compelling
and exclusive value-adds - including extended manufacturer’s warranties and free web support
for all products purchased here. Like thousands before you, you may already be a customer,
or perhaps you are currently in the process of making your first purchase here. If so, on
behalf of our entire team, let me say, "Thank you for your business, and let me assure you
that we will make every reasonable effort to secure and to maintain a long and mutually
satisfactory relationship."
If you have remaining questions, or for immediate assistance (between 9 A.M. and 5 P.M. EST) please call us toll free at
|
For more information about POS-Warehouse.com, contact customer-service@POS-Warehouse.com